to our customers, old company name in catalogs and other documents on april 1 st , 2010, nec electronics corporation merged with renesas technology corporation, and renesas electronics corporation took over all the business of both companies. therefore, although the old company name remains in this document, it is a valid renesas electronics document. we appreciate your understanding. renesas electronics website: http://www.renesas.com april 1 st , 2010 renesas electronics corporation issued by: renesas electronics corporation (http://www.renesas.com) send any inquiries to http://www.renesas.com/inquiry.
notice 1. all information included in this document is current as of the date this document is issued. such information, however, is subject to change without any prior notice. before purchasing or using any renesas el ectronics products li sted herein, please confirm the latest product information with a renesas electronics sales office. also , please pay regular and careful attention to additional and different information to be disclosed by rene sas electronics such as that disclosed through our website. 2. renesas electronics does not assume any liability for infringeme nt of patents, copyrights, or other intellectual property ri ghts of third parties by or arising from the use of renesas electroni cs products or techni cal information descri bed in this document . no license, express, implied or otherwise, is granted hereby under any patents, copyri ghts or other intell ectual property right s of renesas electronics or others. 3. you should not alter, modify, copy, or otherwise misappropriate any re nesas electronics product, wh ether in whole or in part . 4. descriptions of circuits, software and other related informat ion in this document are provided only to illustrate the operat ion of semiconductor products and application examples. you are fully re sponsible for the incorporation of these circuits, software, and information in the design of your equipment. renesas electronics assumes no responsibility for any losses incurred by you or third parties arising from the use of these circuits, software, or information. 5. when exporting the products or technology described in this doc ument, you should comply with the applicable export control laws and regulations and follow the proc edures required by such laws and re gulations. you should not use renesas electronics products or the technology described in this docum ent for any purpose relating to mil itary applicati ons or use by the military, including but not l imited to the development of weapons of mass de struction. renesas electronics products and technology may not be used for or incor porated into any products or systems whose manufacture, us e, or sale is prohibited under any applicable dom estic or foreign laws or regulations. 6. renesas electronics has used reasonable care in preparing th e information included in this document, but renesas electronics does not warrant that such information is error free. renesas electronics assumes no liability whatsoever for any damages incurred by you resulting from errors in or omissions from the information included herein. 7. renesas electronics products ar e classified according to the following three quality grades: ?standard?, ?high quality?, an d ?specific?. the recommended applications for each renesas electronics product de pends on the product?s quality grade, as indicated below. you must check the qua lity grade of each renesas electronics pr oduct before using it in a particular application. you may not use any renesas electronics produc t for any application categorized as ?speci fic? without the prior written consent of renesas electronics. further, you may not use any renesas electronics product for any application for which it is not intended without the prior written consent of renesas electronics. re nesas electronics shall not be in any way liable for any damages or losses incurred by you or third partie s arising from the use of any renesas electronics product for a n application categorized as ?specific? or for which the product is not intende d where you have failed to obtain the prior writte n consent of renesas electronics. the quality grade of each renesas electronics product is ?standard? unless otherwise expressly specified in a renesas electr onics data sheets or data books, etc. ?standard?: computers; office equipmen t; communications e quipment; test and measurement equipment; audio and visual equipment; home electronic a ppliances; machine tools; personal electronic equipmen t; and industrial robots. ?high quality?: transportation equi pment (automobiles, trains, ships, etc.); traffic control systems; anti-disaster systems; an ti- crime systems; safety equipment; and medical equipment not specif ically designed for life support. ?specific?: aircraft; aerospace equipment; submersible repeaters; nuclear reactor control systems; medical equipment or systems for life support (e.g. artificial life support device s or systems), surgical im plantations, or healthcare intervention (e.g. excision, etc.), and any other applicati ons or purposes that pose a di rect threat to human life. 8. you should use the renesas electronics pr oducts described in this document within the range specified by renesas electronics , especially with respect to the maximum ra ting, operating supply voltage range, movement power volta ge range, heat radiation characteristics, installation and other product characteristics. renesas electronics shall have no liability for malfunctions o r damages arising out of the use of renesas electronics products beyond such specified ranges. 9. although renesas electronics endeavors to improve the quality and reliability of its produc ts, semiconductor products have specific characteristics such as the occurrence of failure at a certain rate a nd malfunctions under certain use conditions. fur ther, renesas electronics products are not subject to radiation resistance design. please be sure to implement safety measures to guard them against the possibility of physic al injury, and injury or damage caused by fire in the event of the failure of a renesas electronics product, such as safe ty design for hardware and software in cluding but not limited to redundancy, fire control and malfunction prevention, appropri ate treatment for aging degradation or an y other appropriate measures. because the evaluation of microcomputer software alone is very difficult , please evaluate the safety of the final products or system manufactured by you. 10. please contact a renesa s electronics sales office for details as to environmental matters such as the environmental compatibility of each renesas electronics product. please use renesas electronics products in compliance with all applicable laws and regulations that regul ate the inclusion or use of c ontrolled substances, including wi thout limitation, the eu rohs directive. renesas electronics assumes no liability for damage s or losses occurring as a result of your noncompliance with applicable laws and regulations. 11. this document may not be reproduced or duplicated, in any form, in w hole or in part, without prio r written consent of renes as electronics. 12. please contact a renesa s electronics sales office if you have any questi ons regarding the informat ion contained in this document or renesas electroni cs products, or if you have any other inquiries. (note 1) ?renesas electronics? as used in this document means renesas electronics corporation and also includes its majority- owned subsidiaries. (note 2) ?renesas electronics product(s)? means any product developed or manufactured by or for renesas electronics.
silicon transistor the m pa802t has built-in 2 low-voltage transistors which are designed to amplify low noise in the vhf band to the uhf band. features ? low noise nf = 1.4 db typ. @ f = 1 ghz, v ce = 3 v, i c = 7 ma ? high gain |s 21e | 2 = 12 db typ. @ f = 1 ghz, v ce = 3 v, i c = 7 ma ? a mini mold package adopted ? built-in 2 transistors (2 2sc4227) ordering information part number quantity packing style m pa802t loose products embossed tape 8 mm wide. pin 6 (q1 (50 pcs) base), pin 5 (q2 base), pin 4 (q2 emitter) face to perforation side of the tape. m pa802t-t1 taping products (3 kpcs/reel) remark if you require an evaluation sample, please contact an nec sales representative. (unit sample quantity is 50 pcs.) absolute maximum ratings (t a = 25 c) parameter symbol rating unit collector to base voltage v cbo 20 v collector to emitter voltage v ceo 10 v emitter to base voltage v ebo 1.5 v collector current i c 65 ma total power dissipation p t 150 in 1 element mw 200 in 2 elements note junction temperature t j 150 ?c storage temperature t stg C65 to +150 ?c note 110 mw must not be exceeded in 1 element. m pa802t high-frequency low noise amplifier npn silicon epitaxial transistor (with built-in 2 elements) mini mold pin configuration (top view) 1995 preliminary data sheet printed in japan document no. id-3636 (o.d. no. id-9143) date published april 1995 p the information in this document is subject to change without notice. package drawings (unit: mm) 2.1?.1
1.25?.1
1 2 3 6 5 4 0.2 ? +0.1 0.65 0.65 1.3 2.0?.2 0.9?.1 0.7 0~0.1 0.15 ? +0.1 654 q 1 q 2 123 pin connections
1. collector (q1)
2. emitter (q1)
3. collector (q2)
4. emitter (q2)
5. base (q2)
6. base (q1)
xy
m pa802t 2 electrical characteristics (t a = 25 c) parameter symbol condition min. typ. max. unit collector cutoff current i cbo v cb = 10 v, i e = 0 0.8 m a emitter cutoff current i ebo v eb = 1 v, i c = 0 0.8 m a dc current gain h fe v ce = 3 v, i c = 7 ma note 1 70 240 gain bandwidth product f t v ce = 3 v, i c = 7 ma, f = 1 ghz 4.5 7.0 ghz feed-back capacitance c re v cb = 3 v, i e = 0, f = 1 mhz note 2 0.9 pf insertion power gain |s 21 | 2 v ce = 3 v, i c = 7 ma, f = 1 ghz 10 12 db noise figure nf v ce = 3 v, i c = 7 ma, f = 1 ghz 1.4 1.7 db h fe ratio h fe1 /h fe2 v ce = 3 v, i c = 7 ma 0.85 a smaller value among h fe of h fe 1 = q1, q2 a larger value among h fe of h fe 2 = q1, q2 notes 1. pulse measurement: pw 350 m s, duty cycle 2 % 2. measured with 3-pin bridge, emitter and case should be connected to guard pin of bridge. h fe classification rank fb gb marking r34 r35 h fe value 70 to 150 110 to 240 typical characteristics (t a = 25 c) 5 0 10 0.5 0.5 1.0 10 15 20 0 0.5 1.0 10 20 1 5 10 50 20 50 100 200 v ce = 3 v v ce = 3 v 25 p t - t a characteristics 100 0 50 100 150 200 total power dissipation p t (mw) ambient temperature t a (?c) free air 2 elements in total per element collector current i c (ma) base to emitter voltage v be (v) i c - v be characteristics collector to emitter voltage v ce (v) collector current i c (ma) collector current i c (ma) dc current gain h fe h fe - i c characteristics i c - v ce characteristics 160 a m 140 a m 120 a m 100 a m 80 a m 60 a m 40 a m i b = 20 a m
m pa802t 3 0 0.5 0 0.5 1 5 10 50 5 10 15 0.1 1.0 0.5 5.0 0 5 10 15 20 25 1.0 5.0 10 50 1 2 3 4 5 v ce = 3 v
f = 1 ghz v ce = 3 v
i c = 7 ma v ce = 3 v
f = 1 ghz 0.2 2.0 insertion power gain l s 21e l 2 (db) collector current i c (ma) frequency f (ghz) insertion power gain l s 21e l 2 (db) collector current i c (ma) noise figure nf (db) l s 21e l 2 - i c characteristics l s 21e l 2 - f characteristics nf - i c characteristics 0.1 1 0 0.5 2 5 10 20 50 0.2 0.5 1.0 2.0 5.0 1.0 5.0 10 50 2 4 6 8 10 f = 1 mhz v ce = 3 v
f = 1 ghz c re - v cb characteristics collector to base voltage v cb (v) feed-back capacitance c re (pf) gain bandwidth product f t (ghz) collector current i c (ma) f r - i c characteristics
m pa802t 4 s-parameters v ce = 3 v, i c = 7 ma, z o = 50 w frequency s11 s21 s12 s22 mhz mag ang mag ang mag ang mag ang 100.000 .804 e23.8 11.631 154.8 .023 74.8 .920 e16.5 200.000 .692 e48.6 10.839 137.5 .040 64.1 .791 e27.7 300.000 .581 e70.3 9.722 123.8 .050 59.9 .675 e33.5 400.000 .489 e89.0 8.519 112.9 .060 56.7 .597 e37.0 500.000 .419 e104.9 7.434 104.1 .067 55.9 .538 e38.7 600.000 .376 e117.1 6.468 97.5 .075 55.6 .497 e40.0 700.000 .342 e128.6 5.729 91.8 .082 55.7 .467 e41.0 800.000 .321 e138.4 5.115 86.7 .089 56.3 .443 e41.7 900.000 .305 e147.3 4.630 82.5 .096 56.1 .427 e42.5 1000.000 .296 e155.2 4.207 78.5 .104 56.4 .412 e43.6 1100.000 .289 e162.2 3.879 74.8 .111 56.0 .401 e44.6 1200.000 .284 e169.3 3.595 71.4 .119 56.4 .393 e45.8 1300.000 .282 e175.3 3.349 68.1 .127 56.2 .384 e47.3 1400.000 .281 179.0 3.133 64.8 .136 56.0 .379 e48.8 1500.000 .283 173.8 2.945 61.9 .143 55.4 .372 e50.1 1600.000 .283 168.6 2.780 58.8 .151 55.0 .367 e51.8 1700.000 .285 163.8 2.631 56.2 .160 54.4 .363 e53.7 1800.000 .286 159.9 2.514 53.3 .168 53.9 .359 e55.4 1900.000 .289 155.4 2.390 50.5 .177 53.3 .354 e57.3 2000.000 .293 151.8 2.293 47.8 .186 52.5 .351 e59.2 v ce = 3 v, i c = 5 ma, z o = 50 w frequency s11 s21 s12 s22 mhz mag ang mag ang mag ang mag ang 100.0000 .818 e29.4 14.580 156.2 .023 79.9 .932 e14.4 200.0000 .689 e54.3 12.120 137.5 .040 65.1 .824 e23.4 300.0000 .594 e73.1 10.142 124.6 .052 55.0 .716 e30.3 400.0000 .500 e89.8 8.340 114.4 .063 58.5 .620 e32.2 500.0000 .457 e102.8 7.300 107.5 .069 56.4 .577 e34.2 600.0000 .404 e115.0 6.211 101.0 .081 54.9 .525 e35.1 700.0000 .377 e124.4 5.496 96.8 .084 59.5 .511 e36.1 800.0000 .359 e134.3 4.908 91.4 .091 58.4 .471 e36.2 900.0000 .342 e141.5 4.450 88.1 .097 58.4 .458 e35.3 1000.0000 .335 e150.3 4.018 84.7 .100 61.2 .440 e36.5 1100.0000 .326 e155.9 3.750 81.4 .112 61.8 .442 e36.8 1200.0000 .321 e162.4 3.410 78.1 .115 61.4 .417 e37.8 1300.0000 .317 e167.2 3.181 75.6 .124 62.3 .412 e38.5 1400.0000 .321 e173.4 2.995 72.5 .131 63.9 .411 e39.9 1500.0000 .318 e177.5 2.802 69.8 .138 63.6 .407 e40.4 1600.0000 .320 176.6 2.665 67.3 .149 66.4 .400 e41.1 1700.0000 .323 173.2 2.533 66.1 .156 65.3 .394 e43.7 1800.0000 .326 167.8 2.369 63.0 .162 65.9 .394 e44.3 1900.0000 .331 165.6 2.275 61.0 .177 65.4 .390 e45.5 2000.0000 .333 161.4 2.196 59.2 .183 64.5 .384 e47.6 v ce = 3 v, i c = 3 ma, z o = 50 w frequency s11 s21 s12 s22 mhz mag ang mag ang mag ang mag ang 100.0000 .906 e22.7 9.710 161.6 .026 82.5 .962 e10.6 200.0000 .810 e43.7 8.541 145.3 .049 63.8 .895 e18.3 300.0000 .742 e60.6 7.695 133.4 .062 58.7 .811 e25.8 400.0000 .638 e76.6 6.580 122.4 .073 56.0 .732 e27.7 500.0000 .587 e89.8 5.934 114.1 .082 53.4 .680 e31.2 600.0000 .524 e102.2 5.148 107.1 .091 49.7 .624 e33.5 700.0000 .490 e111.4 4.627 102.2 .094 51.8 .603 e34.4 800.0000 .460 e121.4 4.181 96.0 .099 51.2 .568 e35.0 900.0000 .435 e129.9 3.827 92.6 .101 52.9 .540 e35.7 1000.0000 .427 e138.2 3.443 88.1 .107 50.9 .523 e36.7 1100.0000 .404 e144.9 3.199 84.2 .115 53.7 .512 e36.8 1200.0000 .399 e151.7 2.989 79.8 .113 56.6 .500 e38.6 1300.0000 .392 e157.9 2.779 77.4 .121 54.9 .489 e39.2 1400.0000 .392 e163.6 2.638 73.5 .126 56.4 .483 e40.4 1500.0000 .386 e169.1 2.443 71.3 .135 56.4 .477 e41.8 1600.0000 .380 e174.5 2.344 68.0 .137 60.0 .477 e42.4 1700.0000 .382 e179.7 2.239 65.3 .143 59.5 .466 e44.4 1800.0000 .389 176.1 2.113 63.0 .151 59.4 .461 e44.9 1900.0000 .383 172.5 2.025 61.4 .154 62.6 .456 e46.9 2000.0000 .387 168.3 1.922 58.2 .163 62.0 .464 e48.3
m pa802t 5 v ce = 3 v, i c = 1 ma, z o = 50 w frequency s11 s21 s12 s22 mhz mag ang mag ang mag ang mag ang 100.0000 1.009 e14.5 3.544 168.8 .027 78.6 .994 e5.6 200.0000 .955 e29.7 3.359 156.3 .055 73.6 .969 e10.1 300.0000 .937 e42.6 3.277 147.1 .073 63.4 .947 e15.9 400.0000 .864 e56.2 3.034 136.6 .091 57.7 .898 e18.8 500.0000 .838 e67.3 2.891 128.6 .107 51.1 .865 e22.1 600.0000 .775 e79.3 2.674 120.0 .116 46.6 .824 e25.8 700.0000 .745 e88.5 2.485 114.2 .125 45.2 .803 e27.5 800.0000 .708 e99.1 2.338 106.8 .127 41.2 .776 e29.7 900.0000 .670 e107.9 2.177 101.4 .132 40.2 .740 e31.5 1000.0000 .649 e116.8 2.052 96.0 .135 37.2 .723 e33.7 1100.0000 .621 e124.0 1.914 90.8 .131 36.6 .719 e34.2 1200.0000 .608 e131.8 1.819 86.0 .129 35.4 .700 e36.3 1300.0000 .587 e138.5 1.713 82.4 .130 35.2 .691 e37.6 1400.0000 .587 e144.5 1.628 77.7 .128 36.1 .681 e39.2 1500.0000 .573 e152.6 1.533 73.4 .127 36.0 .662 e40.7 1600.0000 .559 e157.1 1.464 70.3 .124 37.5 .660 e42.7 1700.0000 .562 e164.2 1.421 67.2 .120 39.1 .658 e44.0 1800.0000 .557 e168.9 1.350 64.7 .122 43.3 .658 e46.0 1900.0000 .557 e173.9 1.296 61.1 .122 45.2 .641 e47.8 2000.0000 .551 e178.6 1.240 58.0 .124 48.5 .643 e50.1
m pa802t 6 [memo] no part of this document may be copied or reproduced in any form or by any means without the prior written consent of nec corporation. nec corporation assumes no responsibility for any errors which may appear in this document. nec corporation does not assume any liability for infringement of patents, copyrights or other intellectual property rights of third parties by or arising from use of a device described herein or any other liability arising from use of such device. no license, either express, implied or otherwise, is granted under any patents, copyrights or other intellectual property rights of nec corporation or others. while nec corporation has been making continuous effort to enhance the reliability of its semiconductor devices, the possibility of defects cannot be eliminated entirely. to minimize risks of damage or injury to persons or property arising from a defect in an nec semiconductor device, customer must incorporate sufficient safety measures in its design, such as redundancy, fire-containment, and anti-failure features. nec devices are classified into the following three quality grades: standard, special, and specific. the specific quality grade applies only to devices developed based on a customer designated quality assurance program for a specific application. the recommended applications of a device depend on its quality grade, as indicated below. customers must check the quality grade of each device before using it in a particular application. standard: computers, office equipment, communications equipment, test and measurement equipment, audio and visual equipment, home electronic appliances, machine tools, personal electronic equipment and industrial robots special: transportation equipment (automobiles, trains, ships, etc.), traffic control systems, anti-disaster systems, anti-crime systems, safety equipment and medical equipment (not specifically designed for life support) specific: aircrafts, aerospace equipment, submersible repeaters, nuclear reactor control systems, life support systems or medical equipment for life support, etc. the quality grade of nec devices in standard unless otherwise specified in nec's data sheets or data books. if customers intend to use nec devices for applications other than those specified for standard quality grade, they should contact nec sales representative in advance. anti-radioactive design is not implemented in this product. m4 94.11
|
